Integrex Matrix to Matrix 2 - Part 2

For Integrex models with the lower turret option (ST), tool data "auto set" feature is reversed compared to the mark IV. There are now two MSR units, one for the lower turret which is on the right end of the machine, and one for the upper, on the left end.

Lower turret tools 101 thru 109 are set with tool setter, then 1 thru 9 are "autoset". This is the opposite of the Mark IV Matrix, which has only one MSR unit.

Integrex Matrix to Matrix 2 - Part 1

There are quite a few differences when going from the Mark IV series Integrex to the new "I" models with the Matrix 2 control. I will share, as I come across them...

Part 1 - In Mazatrol, all "B" and "C" axis positioning commands are no longer in the actual machining unit. They are rather on a separate "index" unit, more like a Horizontal mill. When loading a Matrix program into the control Matrix 2 automatically converts and inserts these units for you, with the exception of some "2-workpiece mode" situations. When programming from scratch it can be a bit of a learning curve, but not too bad.

Logo

Like the logo?

From mark IV to "I" Integrex

Wow, huge differences/changes on newer Mazak Integrexes.
Mazak should have put out a manual or class for those going from one to the other. Maybe I'll put something together...

Integrex Simultaneous machining

If you haven't unlocked the power of "2 workpiece mode" on you Mazak Integrex St, I can help you cut cycle times in half.

Both spindles and turrets machining at the same time, it's great, check it out!!

Growth

Brueckner CNC Services is growing rapidly! We're now an LLC...

Macros & CAM

 Mastercam to post out complex tool paths, then combining with custom macro B for the repetitive step overs and cut depths.